Direct replacement for the original proportional valve. This has a straight through 50/50 proportioning. With our front brake kit and stock rear brakes this setup work really well.
Also allows you to put a SSBC in-line proportioning valve to allow for fine tune adjustment.
Made out of polished Aluminium.
Posted by Noah on 23rd Jul 2018
Had a problem with a customers car after a new master cylinder and stainless lines. A brief phone call is all it took to convince me. It bolts right in place and the results are truly undeniable.
Posted by Tony on 31st Oct 2017
The best 1.5 hour upgrade I could make to my TR. I could tell the difference in the brakes just pulling out of the garage.
Posted by FastG on 27th Sep 2016
The valve installed perfectly in the original position. I used a Harbor Freight brake bleeder to suck all the fluid out of the system before I started so I did not even spill a drop of brake fluid. I also loosened the two top hard lines at the master cylinder so I could pivot then out of the way, it gave we a lot more room to work. I put the bottom lines in first, then the top and re-bleed the system. Easy install the the brakes work much better without the crazy nose dive the original setup had.
Posted by Unknown on 1st Sep 2015
Easy install (bolt on). Looks nice in the engine bay. Simply perfect.
Posted by Miles Johnson on 19th Oct 2013
Thanks for all you do for us TR7 & TR8 owners you are a lifeline for us. Keep up the great work.